Walvoil DPX100 8 Sections with Can Bus Otto Mini Joysticks hydraulic distributor for forestry equipment
≈ $6,773
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 663 39...
Show
+48 663 399 034
Poland
Poland
Poland
Poland
Poland
Poland
Poland, Tarnowskie Góry
Poland, Tarnowskie Góry
Poland, Tarnowskie Góry
Lithuania, Kazlų Rūdos
Lithuania, Kazlų Rūdos
Lithuania, Kazlų Rūdos
Lithuania, Kazlų Rūdos
Lithuania, Kazlų Rūdos
Lithuania, Kazlų Rūdos
Lithuania, Kazlų Rūdos
Lithuania, Kazlų Rūdos
Lithuania, Kazlų Rūdos
Lithuania, Kazlų Rūdos
Lithuania, Kazlų Rūdos
Otto Canbus 12/24 V joysticks.
This kit is configured for the most common machine set-ups and supports up to 8 standard forestry crane functions. If you require a different dedicated configuration, we can tailor it to your needs, including variations in coils, voltage, number of sections, anti-shock valves, connections, etc.
The kit is designed for plug-and-play convenience. We take care of everything from the connectors to the software configuration.
We offer technical support and are available at any time via email, WhatsApp and telephone.
If you have any questions or require assistance, you can contact us at any time at - or -.
Once the order has been placed, flow rate and pressure can be fully customised to the customer’s specific requirements.
-------------------------------------------------- ------------------------------------------------- - -------------------------------------------------- --------
Walvoil DPX 100 hydraulic section valve with compensation, fully proportional
Technical specifications of the standard configuration:
Inlet section: 32 GPM 120 l/min – Pmax 300 bar 4351 psi Power supply connection: 3/4‘ BPS, tank return connection: 3/4’ BPS
1. Main boom 60 l/min 16 GPM anti-shock valves 190/80 bar 2755/1305 psi A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever
2. Boom 60 l/min 16 GPM anti-shock valves 190/220 bar 2755/3190 psi A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors and hand lever
3. Swing 40 l/min 10 GPM anti-shock valves 200/200 bar 2900/2900 psi A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors and hand lever
4. Extension 80 l/min 21 GPM anti-shock valve 140 bar/closed rod 2030 psi side A 4/3 centre; A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors and hand lever
5. Rotator 20 l/min 5 GPM, A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors and hand lever
6. Grapple 60 l/min 16 GPM, A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors and hand lever
7. Left leg support 20 l/min 5GPM A+B closed circuit, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors and hand lever; Spool: 20 l/min; No anti-shock valves
8. Right leg support 20 l/min 5 GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever; Spool: 60 l/min; No anti-shock valves
Outlet section: with the option to combine valves, with a vent valve (LS relief), with a pressure-reducing valve. Control port “V” and drain port “L” closed. Side connections “T1”, “P1”, “LS1” sealed. DBV fixed and sealed to 175 bar at 90 l/min.
-------------------------------------------------- ------
CANBus Otto Joysticks
CANBus board for analogue/digital inputs.
DESCRIPTION
MDCi is an electronic circuit board with a CANBus interface
Simulate 2 JC joysticks using 2 Otto joysticks and a push-button dashboard.
Transmission takes place immediately upon switching on the
electronic board.
FEATURES
- Supply voltage from 10 to 30 Vdc
- CAN V2.0B communication bus
- 120-ohm internal terminating resistor not present in this version
- 2 diagnostic LEDs (red and green)
- Firmware can be updated via the integrated serial interface
SIGNALS
Red LED flashes once: Short-circuit fault on the stabilised +5V output
Red LED flashes twice: One of the analogue inputs was detected as not being in the rest position upon power-up
The input is disabled until a reset is performed.
Green LED is lit: The circuit board is functioning correctly.
The green LED flashes once each time the status of an input (analogue or on/off) changes.
MDCi control unit for OTTO joystick interface
and button panel for Waldkranich
Installation version: X1
Firmware: mdc_P5_01.hex
Config file: mdc_P5_01.cfg
--------------------------------------------------
------
Technical specifications:
Supply voltage: 10 VDC to 30 VDC (internal 5x20 8A fuse, type F8A)
Current consumption: 300 mA + load outputs (max. 7.5 A)
Operating temperature range: -20 ÷ +70 °C
Power supply for external potentiometers: +5 V – max. current 50 mA
Minimum PWM current range: from 100 to 2500 mA
Maximum PWM current range: from 100 to 2500 mA
PWM frequency: 50–60–70–85–100–125–150–200–250–300 Hz
Impedance of analogue inputs: 11 kOhm at 2.5 V
Overall dimensions with connector fitted: 256 × 210 × 45 mm
Drill hole dimensions: 242 x 142 mm (4 holes, 6 mm in diameter)
-------------------------------------------------- ------
NOTE:
To achieve a cable length of L = 1.5 m, you must
- Make the joystick/cable connections using 7x0.75 mm² wire by removing the
original connectors
- Insert the corrugated sheath and secure it to the underside of the joystick (see photo).
- Connect the 7x0.75 cable to the 6-pin Deutsch socket
(these are small contacts)